珍藏本站 | 在线留言 | 联络我们 | 网站舆图您好!接待来到常州复兴华达科技股份有限公司官网!

天下效劳热线13806116381

快速导航:mgm美高梅集团

+ 更多c 联络我们ontact us

常州复兴华达科技股份有限公司
联系人:张先生
脚  机:13806116381
           13338193681
电  话:0519-83111168
           0519-83111128
传  实:0519-85026658
天  址:中国常州新北区乐山路58号
网  址:www.lambor.com.cn
邮  箱:czlambor@126.com

户外一体化综合柜

mgm0108.com

澳门美高梅官网娱乐

户外一体化综合柜 产品名称:户外一体化综合柜
产品描述:户外一体化综合柜
在线询盘
【产物详情】

 

  我公司消费的户外综合柜是为知足挪动通讯分布式基站的无机房建立要求而提出,知足室外通讯情况和装备安装所指定的技术规范尺度。关于各种接纳分布式装备(BBU+RRU)的户外微蜂窝、宏蜂窝等皆可参照实行,并凭据实际情况设置通讯装备安装区及集成电源体系等。正在室外安装的通讯机柜,机柜内装备安装通讯装备、电源、电池、温控装备及其他配套装备(如ODF等)的格舱,能为内部装备一般运转供应牢靠的机器和环境保护的可拆式拼装机柜,可安装于户外山顶、楼顶等难以搬运的中央,具有优越的防风、防沙、防雨、防晒及防盗等功用,隔热阻燃型机柜壳体是由低导热夹层阻燃质料构成,知足现场散件拼装,防护品级IP55。机柜装备舱内接纳空调、热交换器等停止换热体式格局。

基本要求

温度、相对湿度

工作温度局限:-40~+50

储存温度局限:-25~+55

运输温度局限:-45~+70

相对湿度要求:5%~100%

大气压力

62kpa~101kpa(近似于海拔0m~5000m

太阳辐射强度

总辐射强度1120×(1±10%W/m2

表面取外面处置惩罚

机柜外面涂层色彩运用灰白色或浅灰色,涂层相符GB/T3181-1995中的要求。

构造特性

1、 室外机柜内由可安装电源装备、通讯装备、配线装备(ODF)、温控装备(可选)、蓄电池及其他备附件的功用区构成。凭据现实运用状况,机柜内可分设为通讯装备安装区、电池舱等多少个舱。

2、 室外机柜质料接纳厚度不小于50mm的绝热阻燃板材料,绝热阻燃板表里接纳厚度不小于0.5mm的彩钢板。芯材导热系数小于0.041W/m.K,板材导热系数不大于0.472W/(㎡.K)。

监控告警

室外一体化机柜具有情况量告警的采集功用。外部环境的告警信息采用于节点体式格局经由过程基站传送到网管OMC。告警状况开关量接纳继电器实现,防备采集器带电或不共天形成主设备破坏。温度、烟感安装正在综合柜顶部,火浸传感器安装正在底部。当综合柜发作门开动做常常,收回告警旌旗灯号,并能将告警旌旗灯号以开关量的体式格局传给动环监控采集器。当机柜内温度超越划定局限时,收回高温告警,并能将告警旌旗灯号以开关量的体式格局传给动环监控采集器。

组装体式格局

同时支撑束装式(束装发货现场吊装)和拼接式(散件发货现场拼接)两种组装体式格局。如单机柜不克不及知足建立要求需求增添机柜扩容时,可知足取扩容机柜之间的范例衔接扩容要求。根据肩并肩形式停止机柜扩容,同时扩容机柜取原有机柜知足装备一般运转的交、直流供电装备安装的空间要求。

Changzhou Zhongxing Huada Technology Co.,Ltd.

Specification for Outdoor Integrated Cabinet

Nov, 2012


PREFACE

Outdoor integrated cabinet manufactured by our company is brought forward in order to meet the construction requirements for distributed mobile communication base station without machine room. It satisfies the technical standards for outdoor communication environment and equipment installation. All kinds of distributed equipment (BBU+RRU) of outdoor Micro-cell and Macro-cell can refer to our specifications, and the customer can also configure the cabinet with communication equipment installation area and integrated power system according to the actual situation. Cabins inside the cabinet enables the installation of communication equipment, power supply, battery, air conditioning equipment or other equipment (such as ODF). This detachable assembled cabinet provides reliable mechanical and environmental protection for interior equipment and can be installed on the mountain top, roof or other places that are inconvenient for transportation. The cabinet features anti-wind, anti-sand, anti-rain, anti-sun, anti-theft function ant etc. Its thermal insulated and flame retardant shell is composed of a low thermal conductive laminated fire retardant material. The cabinet meets the on-site assembly requirement, and its protection class is IP55. The equipment cabin transfers heat by air conditioner or heat exchanger.


1. Basic Requirement

Temperature and relative humidity

Operating temperature: -40~ +50 (-40~ +122)

Storage temperature: -25~ +55 (-13~ +131)

Transportation temperature: -45~ +70 (-49~ +158)

Relative humidity: 5% ~ 100%

Atmosphere pressure: 62kpa101kpa (elevation of 0m~5000m)

Intensity of solar radiation: total radiation intensity of 1120×(1 ± 10%) W/m2

2. Appearance and Surface Treatment

The cabinet surface coating color is grey or light grey, and the coating meets the requirement of GB/T in 3181-1995.

3. Structure

3.1 Outdoor cabinet can be composed of power equipment, communication equipment, wiring equipment (ODF), temperature control equipment (optional), battery and other accessories functional area. Based on the actual application, the cabinet can be divided into communication equipment installation area, battery cabin and other cabins.

3.2 Outdoor cabinet uses thermal insulated and flame retardant material with thickness not less than 50mm, and its inner and outer surfaces are covered with color steel plates whose thickness is not less than 0.5mm. The coefficient of thermal conductivity of core material is less than 0.041W/m·K, and that of plate is less than 0.472W/ (m2·K).

4 Monitoring Alarms

Outdoor integrated cabinet has alarm function for environment. The alarm information of external environment is transmitted through the base station node to the network management OMC by dry connector. Digital alarm status is achieved by using relays in case of the charged collector or no-common ground. Temperature and smoke sensors are arranged at the top part of the integrated cabinet, and water sensor is mounted at the bottom. When the cabinet door opens, it send alarm signal to the dynamic environment monitoring collector using switch quantity. When the temperature of the cabinet exceeds the limit, it sends a high temperature alarm and inform the dynamic environment monitoring collector using switch quantity.

5 Assembly Method

The cabinet can be delivered as a whole (assembled in the factory) or in parts (assembled on site). If single cabinet is insufficient for construction requirements, additional cabinets can be added according to expansion standards. The expansion is accomplished using side-by-side mode. The expanded and original cabinets meet the spatial requirements for the installation of DC or AC power supply devices that are necessary for normal operation of the equipment.

6 Specifications and Technical Parameters

6.1 One unit with two cabinsupper 19-inch rack cabin and lower battery cabin

External dimensions(mm)

910×910×2150 (Depth×Width×Height)

Internal dimensions(mm)

800×800×1800

(Depth×Width×Height)

Height of upper cabin (mm)

1040

Height of lower cabin (mm)

712

Equipment mounted on door

80W/K heat exchanger for upper cabin

80W/K

Lower cabin

200W TEC

Cooling power

More than 200W

Heating power

Around 500W


6.2 Main equipment cabinet

Cabin external dimensions(mm)

910×910×2150 (Depth×Width×Height)

Cabin internal dimensions(mm)

800×800×1800 (Depth×Width×Height)

Equipment on door

Heat exchanger

150W/K

6.3 Equipment cabinet

Cabin external dimensions(mm)

910×910×2150 (Depth×Width×Height)

Cabin internal dimensions(mm)

800×800×1800 (Depth×Width×Height)

Equipment on door

Heat exchanger

150W/K

6.4 Battery cabinet

Cabin external dimensions(mm)

910×910×2150 (Depth×Width×Height)

Cabin internal dimensions(mm)

800×800×1800 (Depth×Width×Height)

Equipment on door

200W TEC

Cooling power

More than 200W

Heating power

Around 500W

Changzhou Zhongxing Huada Technology Co.,Ltd.

上一条:情况监控单位
下一条:机柜 美高梅687669 com
泉源:本站 工夫:2017-02-18 10:52:08
阅读更多 户外一体化综合柜  的内容
澳门美高梅官网娱乐
澳门美高梅官网娱乐